The ARCS2 Radio control switcher provides 2 separate switched circuits
from one proportional or switched (center off) R/C channel.
Tested and works with 27Mhz,35Mhz,40Mhz,72Mhz and 2.4Ghz
If you push the stick up once it switches on the switch 1,
and push up again to turn it off. The same for switch 2 moving the stick down.
if you are using a switched channel you will need to
move the switch and then back again to turn on otherwise
it will switch on and off.
and push up again to turn it off. The same for switch 2 moving the stick down.
if you are using a switched channel you will need to
move the switch and then back again to turn on otherwise
it will switch on and off.
I can make it Latching or Non-Latching as required
Latching will be supplied.
Each of the two outputs can be driven independently.
You can use to different supply voltages
e.g. Switch 1 for lights 6 Volts, Switch 2 for lights,pump 12 Volts.
This switcher will operate most of the auxiliary functions on a
Boat, Car, Tank, Plane, or anything you want to
switch up to 10A per circuit.
The circuit is powered from the receiver so switching voltage can be from 2 – 24 Volts.
The size is only 32mm x 25mm x 11mm.
Screw connections are provided to connect the outputs.
2 WAY Radio Control Switch R/C RC Boat Car Tank Plane
Solid State No relays to were out.
Total price only $ 105
On a car it may switch head lights and a Mini MP3 player on/off etc.
On a boat common usees are navigation lights, interior and deck lights.
On a tank as in mine a small MP3 player to play The crew talking to each other.
On a plane Nav lights and maybe landing lights or even glow plug.
What can you think to switch????
Built and tested my myself and used by myself and others at (SJ'S RC CLUB).
Exclusively Posted by
SARMAD JAVAID
SARMAD JAVAID
thanks a lot for the new montage site :)
ReplyDeletethanks for you such a good review.
Deleteplease do like and share me at facebook as well..
www.facebook.com/sarmadRcclub