Tuesday, 30 July 2013

Delta Ray RC Plane, RTF Mode 1

Overview

The SJ's RC Club's Delta Ray is one of the most exciting RC planes for beginner pilots; equipped with SAFE technology to help you fly smoothly time and time again.



SPECIFICATION

Wingspan
34.0 in (863mm)
Overall Length
31.8 in (807mm)
 
Wing Area
384 sq. in. (2480 sq. cm.)
 
Flying Weight
17.6 oz (500 g)
 
Motor Size
(2) 180-size brushed motors (installed)
 
Radio
DX4e 4-channel DSMX transmitter (included)
 
Servos
(2) SV80 servos (installed)
 
CG (center of gravity)
14.4 in (365mm) from the rear of airplane at fuselage center line
 
 
 
 
Prop Size
5 x 3
 
Recommended Battery
7.4V 2S 1300mAh 20C Li-Po (included)
 
Approx. Flying Duration
8 minutes
 
Charger
2-cell DC balancing Li-Po charger (included)
 
Minimum Age Recommendation
14 years
 
Experience Level
No Experience Necessary
 
Recommended Environment
Outdoor
 
Assembly Time
Less than 1 Hour
 
Is Assembly Required
Yes
 
 
EXCLUSIVELY AVAILABLE ON
SJ's RC CLUB

follow the link to order.. 

http://rcclub-sarmad.blogspot.com/p/blog-page.html


 
 
 
 

Thursday, 11 July 2013

UMX Extra 300 3D BNF by E-flite (EFLU1080)




Overview

The Ultra Micro eXtreme (UMX) Extra 300 3D makes the dream of a 3D plane you can fly almost anywhere a reality. With a flying weight of barely over an ounce (just 33 grams), battery and all, it is slow and light enough to fly extreme 3D maneuvers in spaces no larger than a dining or conference room. Its ingenious laser-cut foam airframe, designed by ETOC champ Seth Arnold, makes it all possible.
The structure uses a fraction of the foam material usually used in profile planes of this type and is covered with micro-thin film. The airframe is reinforced with carbon fiber rods that keep flexing and twisting to a minimum so you can fly the most aggressive 3D maneuvers with absolute precision. Optional Side Force Generators are also included. These razor-thin pieces of foam slide onto the leading edge of the wing and enhance rudder authority in knife-edge flight. They improve tracking during precision aerobatics too.
The UMX™ Extra 300 3D BNF comes completely assembled with a punchy 8.5mm coreless brushed motor and Spektrum™ AR6400L Ultra Micro DSM2 Receiver/ESC installed. Built-in long-throw servos on the AR6400L drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 1S 3.7V 150mAh Li-Po battery and DC Li-Po charger are also included. For best performance, a DSM2 aircraft transmitter with dual rates and expo is recommended.




Key Features

  • An ultra micro that's ideal for indoor 3D flight
  • Completely built and flight ready—just bind to any DSM2™ aircraft transmitter with dual rates and expo
  • Includes a Li-Po flight battery and DC Li-Po charger
  • Small and light enough for experienced pilots to fly almost anywhere indoors
A 4+ Channel DSM2 compatible Transmitter. A programmable transmitter capable of dual rates and exponential is highly recommended.









BEST FOR AEROBATICS

exclusively posted by
SARMAD JAVAID



Sunday, 7 July 2013

INTRODUCTION

WELCOME ON BOARD-

We are an Rc Club  - and since 2003 our goal is to provide a forum for club members students in PAKISTAN to exchange ideas and benefit from one anothers experiences with the hobby of building and the sport of flying radio controlled model aircraft, Ship, vehicles etc.
We are committed to promoting the enjoyment of safe R/C flying in accordance Sj's R/C Club rules and guidelines.